Short answer
Usually not in any dependable way. Some people report a small improvement from placing foil near an antenna, others see no change or a worse picture. Foil is not a substitute for a better antenna, a better position or more height.
Why people try it
Aluminum is a conductor, so it seems like it should “collect” more signal. In practice, an antenna works because its elements are cut to a size related to the wavelength and connected to the cable in a particular way. Adding random metal does not necessarily add useful pickup. The same idea comes up for routers; see whether aluminum foil really boosts Wi-Fi.
Why it usually does little
- Detuning. Metal placed close to an antenna’s elements can change its tuning and pattern, sometimes for the worse.
- Unpredictable reflections. Crumpled foil scatters signals in uncertain ways, which can add as many problems as it solves.
- Not connected. Foil that does not connect to the antenna’s feed point is not part of the receiving element.
- No gain from nothing. Any real gain from a reflector comes from shape, spacing and size, none of which foil wrapped around an antenna provides.
When a reflector can help
A reflector is a real design element. Many Yagis and bowtie antennas have one built in, which sits a precise distance behind the active element to reject signals from the rear and boost the front. A flat piece of metal placed behind a simple antenna can occasionally help a little, especially to cut interference from behind. But the results depend on distance, size and frequency, and are hard to predict. If you want this effect reliably, buy an antenna designed with a reflector. See Yagi vs bowtie vs log-periodic.
Better fixes
- Move or raise the antenna. Placement almost always matters more than tweaks. See how high to mount an outdoor antenna.
- Re-aim it toward the tower and rescan.
- Check for obstructions from hills, trees and buildings.
- Check cables and connectors. Corroded or loose fittings waste signal; a multimeter can help find breaks.
- Pick a higher-gain antenna if you need more reach.
How to test fairly
If you still want to try foil, change one thing at a time. Rescan channels before and after and compare the number of stable channels and your TV’s signal-quality readout, not just the picture on one channel. If there is no clear improvement, remove it.