Start here
HF Antennas for Ham Radio: Choosing the Right Type
A practical guide to HF ham radio antennas: dipoles, end-feds, verticals, loops and portable options, and how to match each one to your space, bands and noise.
Radio Antennas
HF verticals, end-feds, dipoles, J-poles, SWR, tuners and antennas for restricted lots.
Start here
A practical guide to HF ham radio antennas: dipoles, end-feds, verticals, loops and portable options, and how to match each one to your space, bands and noise.
A common mode choke stops RF flowing on the outside of coax. Learn the symptoms, where to place chokes, and how to make one with ferrite toroids, beads or coiled coax.
You don't need an ATU if your antenna is resonant and the SWR is low, but you will for multiband wires or poor matches. What a tuner does, and what it can't fix.
How end-fed half-wave HF antennas work, what a 6m-80m model like the HFEDZ implies, how to install one, and how to deal with common-mode noise and heating.
How delta loop antennas and broadband folded dipoles (T2FD and the Yaesu YA-30 style) work on HF, their sizes, matching needs and the trade-offs of each.
A 40 meter dipole is about 65 to 67 feet in total, roughly 33 feet per leg. Use 468 divided by frequency, cut long, then trim with an analyzer for the lowest SWR.
Radials are usually about a quarter wavelength long, but for ground-mounted verticals the number of radials matters more than exact length. Formulas and tips.
Build a 2 meter J-pole antenna from copper pipe or ladder line: how it works, starting dimensions, finding the feed point, tuning with an SWR meter and mounting it.
Build an indoor HF antenna from wire: attic or bent dipole, room-perimeter loop and random wire options, with tuning, noise and RF safety advice.
Step-by-step UHF radio antenna installation for vehicles and fixed bases: choosing a location, mounting, routing coax, checking SWR and avoiding common mistakes.
How an antenna analyzer works, how it differs from an SWR meter, and how to calibrate and use one to find resonance and trim an antenna, with common mistakes.
A magnetic loop is a small resonant loop with a tuning capacitor. See how it works, its narrow bandwidth and noise-nulling benefits, efficiency limits and when it's worth it.
How multiband HF verticals differ, with notes on the DX Commander, SE X80, SE HF-360, GAP Eagle and G8JNJ-style designs, plus ground system and tuner needs.
What to know about portable HF whip antennas like the MFJ-2286 and the Icom AH-2b: tuner needs, counterpoise, efficiency limits, safety and better field options.
Options for ham radio antennas under HOA or apartment rules: hidden wires, flagpole verticals, attic and loop antennas, plus what to check in your covenants first.
How to choose VHF/UHF mobile antennas for ham radio, how UHF antenna design works, and when a marine VHF and AIS antenna splitter makes sense.
The benefits of a folded dipole: wider bandwidth, a higher feed impedance that suits twin-lead and Yagi driven elements, a rugged build and broadband HF variants.
The main drawbacks of folded dipole antennas: a high feed impedance that needs matching, extra wire and weight, limited multiband use and loss in terminated versions.
A good SWR for a ham antenna is usually under 1.5:1, and up to 2:1 is acceptable. What the numbers mean, what causes high SWR and how to lower it.
For HF listening, a wideband or multiband vertical placed away from noise is a solid choice. Compare Comet, Butternut, Hustler and DX Commander-style options.
A dipole is a single half-wave conductor; a folded dipole adds a second parallel one, giving about four times the impedance, wider bandwidth and similar pattern.
No antenna adds power, but tall, high-gain CB base verticals such as the Maco V5000, Sirio Vector 4000 and Maco V58 are often called the most powerful. How to judge.
Related topics