Outdoor TV Antennas

Do Hills, Trees and Buildings Block a TV Antenna Signal?

Do hills, trees and buildings block a TV antenna signal? Yes, to varying degrees. See how each obstacle affects reception and what to do about it.

On this page
  1. Short answer
  2. Hills
  3. Trees
  4. Buildings
  5. Multipath
  6. UHF vs VHF
  7. What to do about it

Short answer

Yes. Broadcast TV signals travel mostly in straight lines, so large obstacles between the tower and your antenna can weaken or block them. Different obstacles do it in different ways, and some problems can be fixed with a better position.

Hills

A hill or ridge directly between you and the tower can block the signal entirely, especially at UHF. Signals can bend (diffract) a little over the top of a ridge, but the loss can be large, and a deep shadow behind a ridge may be a dead zone. Moving the antenna higher can help if it lifts the antenna into the line of sight, but a tall hill is a tall hill. Signal-prediction tools such as the FCC DTV map and AntennaWeb take terrain into account and are a good first check. See how far an outdoor TV antenna can really receive.

Trees

Leaves and branches absorb and scatter TV signals, and wet foliage tends to be worse than dry. UHF is generally more affected than VHF. Because trees change with the seasons, a station that comes in fine in winter may be unreliable in summer. A single tree near the antenna can matter more than a forest far away, so mounting the antenna above nearby treetops is often the most effective fix. See how high an outdoor TV antenna should be mounted.

Buildings

Large buildings, especially with metal or concrete construction, can block or attenuate signals, and they also reflect them. In cities, the shadow behind a tall building can disrupt reception, while reflections can also deliver usable signals from unexpected directions. Even small things like nearby roofs, metal siding and power structures may play a part.

Multipath

When reflections arrive at the antenna slightly later than the direct signal, they can interfere with it, producing pixelation or dropouts. A directional antenna can reduce multipath by ignoring signals from the sides and back, which is one reason a Yagi can perform better than a wide-pattern design in cities. See Yagi vs bowtie vs log-periodic. Sometimes a move of just a foot or two sideways changes reception noticeably.

UHF vs VHF

VHF signals generally bend around obstacles better and are less affected by foliage than UHF. If a station you want is on VHF, an antenna designed for it can help in leafy locations. See VHF TV antennas.

What to do about it

  1. Raise the antenna above the obstruction. Even a few feet can change the result.
  2. Try different positions and scan each time. Roof, wall and pole positions can differ greatly.
  3. Aim for the tower, or if the direct path is blocked, try aiming at a reflecting surface and compare results.
  4. Use a higher-gain, directional antenna to add margin. See whether a high gain antenna is better.
  5. Check cables and connections to avoid adding unnecessary loss.
  6. Trim vegetation on your own property if it is practical and safe.

Foil or other quick tricks rarely fix blockage; see does aluminum foil improve antenna reception. For a complete approach, see the buyer’s guide.

The complete guide to outdoor tv antennas

Long-Range Outdoor TV Antennas: A Buyer's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →