FM Radio Antennas

Terk AM/FM Antennas: Omni Indoor and Tower Models Reviewed

A practical look at Terk's omnidirectional indoor FM antenna and amplified AM/FM tower: what they do, how to set them up, where they help and where they fall short.

On this page
  1. About Terk
  2. Terk omnidirectional indoor FM antenna
  3. Terk Tower amplified AM/FM antenna
  4. Setting up an amplified indoor antenna
  5. Strengths and limits
  6. Are omnidirectional antennas any good?
  7. Are digital TV antennas worth it?
  8. Alternatives
  9. Bottom line

This page is a general guide to the design and use of Terk-style indoor antennas, not a lab test. Models and availability change, so check the manual for your specific unit.

About Terk

Terk is a consumer antenna brand that has sold indoor and outdoor antennas for AM/FM radio and television. If you are wondering what the brand’s products are meant for, see what is a Terk antenna for.

Terk omnidirectional indoor FM antenna

An omnidirectional indoor FM antenna is meant to receive from all directions without you having to aim it. It is generally a compact, free-standing unit that connects to the receiver’s antenna input.

Who it suits

  • Listeners whose local stations come from several directions.
  • People who want a tidier alternative to a wire stretched across a room.
  • Anyone for whom the supplied wire gives acceptable but not great results.

What to expect. Compared with the thin wire that comes with many receivers, a dedicated antenna may give a modest improvement, particularly on mid-strength stations. It will not turn a very weak signal into a strong one. If distance or terrain is the problem, an outdoor antenna is the better answer; see which is better, an outdoor or indoor antenna.

Terk Tower amplified AM/FM antenna

The Terk tower-style antenna is described by retailers as an amplified indoor stereo antenna for AM and FM. As commonly described, it combines:

  • An FM section with an omnidirectional design.
  • An AM section, an air-coil or loop-type element, because AM reception needs a different type of antenna from FM.
  • A low-noise amplifier, typically powered by a small adapter, intended to lift weak signals.

The AM side is worth noting. TV antennas and FM dipoles do very little for AM, so a tuned loop or coil element is what actually helps with AM static from nearby electronics.

Setting up an amplified indoor antenna

Your manual has the specifics, but these steps apply in general:

  1. Place the antenna near the receiver, ideally near a window and away from large metal objects.
  2. Connect the supplied cable to the receiver’s antenna input. If your receiver uses 300 ohm screw terminals or a different connector, you may need an adapter or transformer; see 75 ohm vs 300 ohm FM antenna connections.
  3. Plug in the amplifier’s power supply, if the model has one, and switch it on.
  4. Tune to a weak station you care about and try different positions and, for the AM section, different rotations.
  5. Keep the antenna and its power adapter away from computers, routers, chargers and dimmers, because they may add noise.

If you have lost the manual, searching the model name on a manual archive site can help. Use the manual that matches your exact model.

Strengths and limits

Strengths

  • No aiming needed for FM.
  • Includes an AM element, which a plain FM antenna does not.
  • Usually inexpensive and simple to install.

Limits

  • An amplifier raises noise along with signal. In a strong-signal area it can overload the tuner and make reception worse; try bypassing or switching it off.
  • Omnidirectional designs cannot reject multipath reflections the way a directional antenna can.
  • An indoor antenna depends heavily on the building around it.

If you hear hiss or distortion, try our static and poor reception checklist.

Are omnidirectional antennas any good?

They are good for convenience and for situations where signals arrive from many directions. They are less suited to weak or distant stations, where a directional antenna’s extra gain and rejection matter. A fair summary: omnidirectional is easy, directional is stronger.

Are digital TV antennas worth it?

For television, yes, many people use them to receive local broadcasts for free, although results depend on distance and obstructions. Digital TV antennas are not designed for AM, and some do not give good FM results, so if radio is your goal, a radio-specific antenna or a TV antenna used for FM may be a better fit. As for RCA indoor antennas, quality varies by model, so judge any antenna by how it performs in your home rather than by brand name.

Alternatives

  • Reposition or extend the wire antenna that came with your receiver.
  • Build a simple FM dipole, which costs very little.
  • Install an outdoor antenna if indoor options still disappoint.
  • For a full overview of choices, see our FM radio antenna guide.

Bottom line

A Terk-style indoor antenna is a reasonable, low-cost upgrade when your stations are already receivable but noisy, and the tower’s AM element is a plus for those who listen to AM. It is not a cure for weak signals or heavy interference. Try it in several spots, switch the amplifier on and off to compare, and keep the return option open if you buy one.

The complete guide to fm radio antennas

FM Radio Antennas: Indoor vs Outdoor and What to Buy
Read the guide

Keep exploring

Guides from other topics

All topics →