FM Radio Antennas

What is a Terk antenna for?

A Terk antenna is designed to improve reception of over-the-air broadcasts, either AM/FM radio or digital TV. Learn which Terk type you need and what it can and cannot do.

On this page
  1. Short answer
  2. Terk radio antennas (AM/FM)
  3. Terk TV antennas
  4. Do you need one?
  5. What a Terk antenna cannot do
  6. Setup basics
  7. Alternatives

Short answer

A Terk antenna is a consumer antenna meant to improve how well you receive broadcast signals, mainly AM and FM radio or over-the-air digital TV, in a home or similar setting. Which job it does depends on the model. Terk is a brand name rather than a single design, and the product name usually tells you which signals it is meant for.

Terk radio antennas (AM/FM)

Terk’s radio antennas are generally aimed at people whose receiver, shelf system or tuner picks up too much static or too few stations using the supplied wire. These typically:

  • Connect to the antenna input on a receiver, tuner or stereo system.
  • Use a design intended to pull FM signals in from all directions (omnidirectional) or an amplified FM element.
  • In some models, add a separate AM element such as a loop or air coil, since AM needs a different design from FM.
  • May use a powered amplifier to strengthen weak signals.

For a closer look at the AM/FM designs, see Terk AM/FM antennas reviewed.

Terk TV antennas

Terk also sells antennas for digital TV, usually indoor or amplified models that connect to the television’s antenna input to receive local channels over the air. These are intended for TV signals, not for AM/FM radio. Some TV antennas may still pick up FM, as explained in can you use a TV antenna for FM radio, but a TV antenna is not an AM antenna.

Do you need one?

You might consider a Terk, or a similar brand, if:

  • Your radio stations come in noisy or weak with the supplied antenna.
  • Your receiver has an antenna input and nothing is connected to it.
  • You want AM reception improved without a large outdoor antenna.
  • You want to receive local TV channels without cable or streaming.

You may not need one if reception is already clear, or if your problem is something an antenna will not fix, such as interference from household electronics. That is covered in how to fix static and poor FM reception at home.

What a Terk antenna cannot do

  • It cannot receive stations beyond what the signal path and your location permit; an indoor antenna has limits.
  • It cannot cure interference generated inside your home, though positioning it away from the source can help.
  • An amplifier will not necessarily improve a good signal and can worsen one that is already strong.
  • It generally cannot make up for a very weak signal in a poor location, where an outdoor antenna is the better option. See which is better, an outdoor or indoor antenna.

Setup basics

  1. Identify what your model is for from its name and the markings on the box or unit.
  2. Connect it to the right input on the receiver, or the antenna input on the TV.
  3. Power the amplifier if there is one.
  4. Experiment with placement, ideally by a window and away from other electronics.
  5. For TV, rescan channels after any move.

Your manual has the exact steps for your model.

Alternatives

If you just need cheap FM improvement, a homemade dipole often works as well as a basic indoor antenna. For help choosing among all the options, see our FM radio antenna guide.

The complete guide to fm radio antennas

FM Radio Antennas: Indoor vs Outdoor and What to Buy
Read the guide

Keep exploring

Guides from other topics

All topics →