Short answer
Enter your address into a reception-map tool, such as the FCC’s DTV Reception Maps, RabbitEars.info, AntennaWeb or the transmitter locator from an antenna maker. The tool lists stations that should reach your location, with approximate signal strength and the direction of the transmitters. Then confirm the real results with a channel scan once your antenna is connected, since predictions are estimates.
Tools
- FCC DTV Reception Maps. Consumer Reports points to this tool: enter your address, click a station’s call letters and see where its signal comes from, plus how many stations you should be able to receive and their relative signal strength.
- AntennaWeb. Also recommended by Consumer Reports for advice and information, including tips on outdoor antennas.
- RabbitEars.info. A widely used independent site that also shows predicted signal and tower directions.
- Antenna maker transmitter locators. Antennas Direct, for example, offers a locator where you enter an address or ZIP code to see whether you’re within range of the broadcast towers in your area.
- NextGen TV information. For markets with ATSC 3.0 broadcasts, there’s a NextGen TV site listing where they’re available. Consumer Reports notes you’d need a TV with an ATSC 3.0 tuner or an external receiver for that.
These tools are mostly US-focused. For Canada, see best TV antennas for Canada.
How to use them
- Open a tool and enter your full street address (more precise than a ZIP code).
- Look at the list of stations and their network affiliations.
- Note each station’s distance, direction (compass bearing) and predicted signal strength.
- Check the band (VHF or UHF) if the tool shows it. Stations on VHF may need an antenna that handles it well. See why your indoor antenna only gets some channels.
- Note whether stations lie in one direction or several. That determines whether a directional or multidirectional antenna fits.
How to read the results
- Strong signal predicted: an indoor antenna has a good chance.
- Marginal signal: you may need to place the antenna carefully, or use an attic or outdoor antenna. See can you put an indoor antenna in the attic.
- Weak or no signal predicted: an indoor antenna probably won’t be enough; consider an outdoor antenna or alternatives.
- Subchannels: a single station may offer several additional channels, which are in addition to the main network feed.
Rough distance matters too. Antennas Direct notes that the curvature of the earth limits most antennas to roughly 70 miles, and that range depends on the transmitter’s height and power, the antenna height, terrain and obstacles. See what range claims really mean.
Limits of predictions
Maps model terrain and distance but can’t see your building, nearby trees, or interference. Actual reception can be better or worse than predicted. Apartments and homes surrounded by obstacles often get less than a map suggests; see do indoor TV antennas work in an apartment.
Confirm with a scan
After connecting an antenna, run a channel scan and compare it with the prediction. If you get fewer channels than expected, change the placement and rescan. See where to place an indoor TV antenna and how to rescan for channels. Consumer Reports also suggests rescanning about monthly in case you can pick up new stations.
Next steps
Once you know what’s available, choose an antenna that fits your distance and building. Our indoor TV antenna guide can help you decide.