Indoor TV Antennas

Why Your Indoor TV Antenna Only Gets Some Channels (and How to Fix It)

If your indoor TV antenna gets only some channels, the cause is usually band coverage, tower direction, obstructions or a stale scan. Here's how to diagnose and fix it.

On this page
  1. Short answer
  2. Common reasons
  3. Diagnose step by step
  4. Fixes
  5. When to upgrade

Short answer

It’s common for an indoor antenna to receive some stations and not others. The usual reasons are that the missing stations broadcast on a band your antenna doesn’t handle well, they are in a different direction or farther away, something is blocking the signal, or your TV’s channel list is out of date. You can usually narrow it down by checking where the missing stations are and what band they use.

Common reasons

1. The missing station is on VHF (or UHF). Antennas Direct notes that most stations transmit on UHF, but some use VHF, and some UHF antennas can pick up VHF signals but not well. Consumer Reports adds that after the digital transition and the spectrum repack, local channels sit on both VHF and UHF bands, so you want an antenna that works well on both. Many small flat antennas are better on UHF than VHF.

2. The transmitters are in different directions. If you use a directional antenna aimed at one cluster of towers, stations located elsewhere may be weak or missing.

3. Some stations are simply farther or weaker. Signal strength depends on the transmitter’s power and height, terrain, and obstacles. Antennas Direct points out that the transmitter for certain channels may be at a lower elevation on a tower or behind other towers, causing line-of-sight problems.

4. Obstructions and low placement. Buildings, hills, trees, metal roofing and low placement all hurt. Consumer Reports says height is critical. See where to place an indoor TV antenna.

5. Cable or splitter loss. Long cable runs, damaged connectors, or splitters can weaken signals so that only the strongest stations survive.

6. Too much signal. If you’re close to the towers, a strong signal combined with an amplifier can overload the tuner. Consumer Reports notes amps can overload reception from nearby stations. See amplified indoor antennas.

7. An out-of-date or incorrect scan. The TV’s list may not include stations that have changed channels or that you couldn’t receive earlier. Antennas Direct also notes the input should be set to antenna/air, not cable. See how to rescan for channels.

8. A TV tuner problem. Rare, but possible. Antennas Direct suggests trying the antenna on a second TV to rule this out.

Diagnose step by step

  1. List the missing stations. Use a reception map to find their location, distance and band. See how to find out which channels you can get.
  2. Compare: Are the missing ones all on VHF? All in one direction? All far away? That pattern points to the cause.
  3. Check your TV settings: input set to antenna, and signal type set correctly.
  4. Rescan with the antenna in its current position.
  5. Try a different position, preferably higher and by a window, and rescan.
  6. Test with a shorter cable and without splitters.
  7. Test the amp on/off if you have one.

Fixes

  • Missing VHF stations: use an antenna specified for VHF and UHF.
  • Stations in different directions: try a multidirectional antenna, or reposition and rescan for each direction.
  • Weak, distant stations: raise the antenna, try an attic placement, or move to an outdoor antenna.
  • Signal breaks up even when found: see antenna pixelating or breaking up.

When to upgrade

If tuning, placement and cable fixes don’t help, the likely cause is distance or terrain, and a larger antenna mounted higher is the usual answer. See our indoor TV antenna guide and how to make an outdoor antenna signal stronger.

The complete guide to indoor tv antennas

Indoor TV Antennas: How to Choose One That Actually Works
Read the guide

Keep exploring

Guides from other topics

All topics →