Indoor TV Antennas

How do I connect my indoor antenna to my Samsung smart TV?

Connect an indoor antenna to a Samsung smart TV in a few steps: plug the coax into the antenna input, select the TV source, run Auto Tuning, and fix common issues.

On this page
  1. Quick answer
  2. What you need
  3. Step-by-step
  4. Scanning on a Samsung TV
  5. Antenna vs cable setting
  6. If no channels show up
  7. Tips

Quick answer

Plug the antenna’s coaxial cable into the antenna input (usually labeled “ANT IN” or “AIR/CABLE”) on the back of the Samsung TV, switch the TV to its built-in TV source, then run the channel scan from the settings menu (often called Auto Tuning or Auto Program). The TV will then store the over-the-air channels it finds.

Menu names change between Samsung model years, so treat the paths below as typical rather than exact. If yours differs, check the on-screen search in Settings or the manual for your model.

What you need

  • Your indoor antenna, with its coaxial cable.
  • A Samsung TV with a built-in digital (ATSC) tuner. Modern smart TVs have one.
  • A good spot for the antenna, ideally near a window. See where to place an indoor TV antenna.
  • If your antenna is amplified, a power source (often USB or a small adapter).

Step-by-step

  1. Turn off the TV (or at least be ready to rescan), and place the antenna where you want to test it.
  2. Find the antenna port. It’s a round, threaded connector on the back or side of the TV, marked ANT IN, Antenna or AIR/CABLE. It is not the HDMI port.
  3. Screw the coax connector on finger-tight.
  4. If your antenna has an amplifier, connect the power as the manufacturer instructs.
  5. Turn on the TV and change the source to TV (press the Source button on the remote and pick TV).
  6. Run the channel scan as described below.

Scanning on a Samsung TV

Typical menu path (it varies by model and year):

  • Settings > All Settings > Broadcasting > Auto Tuning (or Settings > Broadcasting > Auto Program on some models).
  • Choose Antenna (also shown as “Air”) if asked for a signal type, rather than Cable.
  • Start the scan and wait for it to finish; it may take a few minutes.

When the scan finishes, check the channel list. See how to rescan for channels for more on repeating the scan.

Antenna vs cable setting

If the TV offers a choice between Antenna and Cable, pick Antenna for a TV antenna. An incorrect setting can lead to few or no channels.

If no channels show up

Tips

  • Smart TV apps and streaming don’t pass through the antenna input, and your antenna channels won’t show up in apps. For more on that, read can a smart TV pick up local channels without an antenna.
  • Some Samsung TVs mix antenna channels into a single guide with streaming content; you may need to filter the guide to see only broadcast channels.
  • Run a scan again if you move the antenna.
  • For help choosing an antenna, see our indoor TV antenna guide.

The complete guide to indoor tv antennas

Indoor TV Antennas: How to Choose One That Actually Works
Read the guide

Keep exploring

Guides from other topics

All topics →