Short answer
In general, put the antenna as high as practical, near a window or on an exterior wall facing the broadcast towers, and away from metal objects and electronics. Consumer Reports describes placement as a matter of “location, location, location,” and says height is a critical factor.
There’s no universal best spot, because every home and every set of towers is different. The reliable method is to test a few locations and compare how many stable channels you get.
Find the direction of the towers
Before you start, learn where your stations’ transmitters are. Reception-map tools such as the FCC’s DTV Reception Maps, RabbitEars.info and AntennaWeb show locations and expected signal strength; see how to find out which channels you can get. Directional antennas need to face the towers. Multidirectional antennas don’t, but Consumer Reports notes that they may be less effective for distant stations.
Best spots to try
- In or beside a window facing the towers. Glass lets signals through more easily than many wall materials. Consumer Reports suggests this, provided your window doesn’t just look onto a neighboring building’s wall.
- An exterior wall facing the towers. Consumer Reports calls this the second-best choice.
- Higher up. Along a wall near the ceiling, on an upper floor, or in the attic. Height helps clear nearby obstructions. See can you put an indoor antenna in the attic.
- Away from big obstructions outside, such as large trees, a shed or garage, if you have options.
Many flat antennas can stick directly to a wall or window; some can be painted with non-metallic paint to blend in.
Spots to avoid
- Basements and low spots. Consumer Reports notes you probably won’t get good reception there.
- Behind or on top of the TV, where electronics create interference.
- Next to metal objects, large appliances or other antennas. Antennas Direct advises keeping it away from metal and other antennas.
- Near routers, power adapters and LED lighting that can add noise. See antenna pixelating or breaking up.
- Inside a cabinet or behind thick walls.
How to test spots methodically
- Get a longer coax cable and a female-to-female coupler so you can move the antenna while the TV stays put. Consumer Reports used this approach plus painter’s tape to try positions temporarily.
- Place the antenna in the first spot, run a channel scan, and note how many channels you get.
- Watch a few stations for several minutes to check for pixelation.
- Move to the next spot and rescan. See how to rescan for channels.
- Choose the spot with the most channels that stay stable.
Small moves matter. A few inches can change results, so don’t judge a location from a single position.
Adjusting orientation
For directional antennas, rotate slightly and rescan; stations in different directions may need different aim. If towers are scattered around you, a multidirectional antenna is simpler. If your amplified antenna misbehaves in a good spot, try it with the amp off; see amplified indoor antennas.
When placement isn’t enough
If you’ve tried many positions and still miss channels, the problem may be distance, terrain or the antenna itself. See why your indoor antenna only gets some channels and our indoor TV antenna guide. Living in an apartment adds extra limits; see do indoor TV antennas work in an apartment.