Short answer
SMA and RP-SMA connectors have the same outer thread and size, but the centre contact is arranged differently, so a standard SMA connector and a reverse-polarity (RP) SMA connector do not mate properly. Most Wi-Fi routers and access points use RP-SMA. Many other radio products, including some cellular, GPS and amateur radio equipment, use standard SMA. Check what is on your device before buying an antenna.
What SMA and RP-SMA are
SMA stands for SubMiniature version A. It is a small threaded coaxial connector, designed for a 50 ohm system and used from low frequencies up to many gigahertz, which covers Wi-Fi comfortably. The screw coupling makes a secure, vibration-resistant connection.
RP-SMA is the same connector family with the gender of the centre contact reversed. Wi-Fi manufacturers adopted it widely, and one frequently cited reason is that it kept off-the-shelf standard SMA antennas from being fitted to consumer devices, which relates to regulatory rules on antennas. Whatever the reason, it is now the usual choice on Wi-Fi gear.
How to identify yours
Look at the connector on the device or antenna and check two things: the thread and the centre contact.
| Connector | Thread | Centre contact |
|---|---|---|
| SMA plug | Inside (nut on the connector) | Pin |
| SMA jack | Outside | Socket (hole) |
| RP-SMA plug | Inside (nut on the connector) | Socket (hole) |
| RP-SMA jack | Outside | Pin |
On a typical router, the socket on the router has external threads, with a pin at the centre. The antenna has a nut with internal threads and a hole at the centre. That combination is RP-SMA. If you see an external thread with a hole inside, that is standard SMA.
If you are unsure, look into the opening with a bright light, or read the manufacturer’s specification page for the device.
Why seller labels are confusing
The words “male” and “female” are used inconsistently. Some sellers describe the connector by its housing, meaning threads, while others describe it by the centre contact. An “RP-SMA male” antenna can therefore have a nut and a hole inside it, which looks “female” to a casual observer. Because of this, do not rely only on the male or female label. Check:
- The terms plug or jack.
- Whether the product says RP or reverse polarity.
- Photos showing the centre contact.
- Compatibility information for your router model.
What happens if they do not match
A mismatched pair may appear to screw together partway. The threads can be the same, but the centre pin and socket do not line up. Either the contact will not connect, or the connector will bind if you force it.
- Do not force it. You can damage the contacts or the device’s socket.
- A poor or missing centre connection may reduce signal drastically, and running a transmitter without a proper antenna load can stress the radio. Fit the right antenna before you power on.
Adapters and cable
- Adapters exist between SMA and RP-SMA, and they let you use an antenna with a different connector type. Each adapter adds a small loss and another point where water or strain can cause trouble.
- Extension cables and pigtails let you place an antenna away from the device. Coaxial cable loses signal at Wi-Fi frequencies, and the loss rises with length and with thinner cable, so keep runs short and use low-loss cable made for the frequency. This matters even more when you are building your own gear, as in how to build a high-gain Wi-Fi antenna.
- Tighten threads by hand or lightly with a connector wrench. Over-tightening damages them.
Other connectors you may see
- N-type: a larger, weather-resistant connector used on many outdoor antennas and cables.
- TS-9 and CRC-9: small connectors that appear on many 4G modems and mobile routers. See external 4G LTE antennas.
- U.FL or IPEX: tiny connectors on internal antenna leads in laptops and boards, which are fragile and rated for few reconnections.
Pre-purchase checklist
- Confirm the connector type on your router, access point or adapter.
- Look for plug or jack and RP or standard, not only male and female.
- Check the frequency range matches your equipment (2.4 GHz, 5 GHz or both).
- Plan cable length and any adapters up front.
- Buy from a seller with clear photos and a return option.
For choosing the antenna itself, see our overview of long-range Wi-Fi antennas, and what antenna gain numbers mean.