Wi-Fi and LTE Antennas

Wi-Fi Antenna Gain vs Range: What 20dBi and 10km Claims Mean

What dBi really means, why a 20dBi Wi-Fi antenna does not automatically reach 10 km, and how beamwidth, line of sight and both ends of the link set real range.

On this page
  1. What dBi measures
  2. What gain does to range
  3. What a 5 dBi antenna can and cannot do
  4. Why a 20 dBi antenna does not give 20 dBi of range
  5. Reading a “10 km” claim
  6. Practical checks before buying

What dBi measures

Antenna gain in dBi compares how strongly an antenna sends or receives in its best direction against a theoretical antenna that radiates equally in every direction (an “isotropic” radiator). It is a measure of focus, not of added power. An antenna is passive: it does not make the signal stronger, it redistributes it.

Decibels are logarithmic. Every 3 dB roughly doubles the power in the favoured direction, and every 10 dB is a tenfold change. A 20 dBi antenna therefore concentrates the signal about a hundred times more than the reference in its best direction, but at the cost of the other directions.

You may also see dBd, which compares against a dipole. A dipole has about 2.15 dBi of gain, so dBd figures look smaller. Some listings are vague about which unit they use, so treat headline gain numbers cautiously.

What gain does to range

For a given transmitter, more gain generally means more reach in the direction the antenna points. The trade-off is beamwidth:

  • Low-gain omnidirectional antennas (roughly 2 to 9 dBi) cover a wide area around them.
  • Mid-gain panels and sectors cover a narrower wedge.
  • High-gain Yagis, grids and dishes make a narrow beam that must be aimed carefully.

Free-space range does not scale one-to-one with decibels. Signal strength falls with the square of distance, so doubling the distance costs about 6 dB. Gain helps, but real range is eaten by walls, foliage, interference and the receiver’s sensitivity.

What a 5 dBi antenna can and cannot do

There is no single distance for a 5 dBi antenna. It is a modest-gain omnidirectional design, a small step up from a typical 2 to 3 dBi stock antenna. Expect a small improvement in the horizontal plane and no miracle. If your router is far from where you need coverage, a better position will usually help more than swapping antennas. Our guide on how far Wi-Fi reaches outside the house covers realistic expectations.

Two common follow-up questions:

  • Where should I point router antennas? A vertical rod antenna radiates in a doughnut shape, with the weakest signal off the tip. Vertical antennas cover the floor they are on well. If devices are on floors above and below, tilting one antenna can help. Mixed orientations are a reasonable compromise.
  • How long should a 2.4 GHz antenna be? The wavelength at 2.4 GHz is about 12 cm, so a quarter-wave element is roughly 3 cm. Real antennas are often longer because they contain several elements or sit inside a sleeve, so do not judge gain by length alone.

Why a 20 dBi antenna does not give 20 dBi of range

A Wi-Fi link has two ends, and both must hear the other:

  • Your access point may transmit through a 20 dBi antenna, but a phone or laptop replies with a small internal antenna and low power. The access point can be loud while the client still cannot be heard.
  • Antenna gain also acts on reception. Gain at both ends adds to the link budget, which is why serious long links use matched directional antennas on both sides.
  • Regulations in most countries limit total radiated power, so adding gain to a router may require reducing transmit power to stay legal. Check the rules where you live.

A 20 dBi panel or grid is a genuine tool for a point-to-point link. It is rarely a cure for weak coverage in a house.

Reading a “10 km” claim

Listings that mention 10 km are almost always describing best-case conditions:

  • Line of sight: the path must be clear, not just visible by eye. Wi-Fi needs a clear zone around the straight line, called the Fresnel zone. At 2.4 GHz over 10 km the first zone is wide at the midpoint, on the order of 17 metres radius. Trees, buildings and even uneven ground can intrude.
  • Dishes at both ends: such claims typically assume directional antennas, often dishes, at both ends. Using the same equipment on one side and a phone on the other does not meet the assumption.
  • Path loss: free-space loss at 2.4 GHz is roughly 100 dB at 1 km and about 120 dB at 10 km before any obstacles. High gain and good receiver sensitivity are needed to bridge that.
  • Data rate: distance usually lowers the usable speed. A claimed range may be for a slow, barely usable link.
  • Rules and power limits: the product may be sold with settings that exceed what is legal in your region.

Treat a 10 km figure as a ceiling under ideal conditions, not a promise. For a realistic project, see how to link two buildings with a point-to-point Wi-Fi bridge.

Practical checks before buying

  1. Decide whether you need coverage around you (omni) or a link to one place (directional).
  2. Confirm the band (2.4 GHz, 5 GHz or both) matches your equipment.
  3. Check the connector type, as covered in SMA versus RP-SMA connectors.
  4. Keep cables short, since cable loss can cancel out antenna gain.
  5. Prefer listings that give the beamwidth and test conditions, not only the dBi figure.

For a broader comparison of antenna shapes, start with our guide to long-range Wi-Fi antennas.

The complete guide to wi-fi and lte antennas

Long-Range Wi-Fi Antennas: Which Type to Choose
Read the guide

Keep exploring

Guides from other topics

All topics →