Short answer
A standard home router often reaches somewhere in the region of 150 feet indoors and around 300 feet outdoors under ideal, open conditions. Those are commonly quoted figures, not guarantees. In a real house, with the router sitting inside and the signal passing through walls, you may get a usable signal for only a fraction of that distance into the garden, and often much less on the far side of the house.
Range is also not the same as speed. A signal can be detected at 100 feet and still be too weak or noisy for video calls.
What affects range outside
- Where the router is. A router in the middle of the house sends little signal to the far side. A router near a window facing the yard gives better outdoor reach.
- Walls and materials. Brick, concrete, stone, metal siding, foil-backed insulation and low-emissivity glass all absorb or reflect Wi-Fi.
- Vegetation. Trees, dense hedges and wet foliage weaken the signal, especially at 5 GHz.
- Interference. Neighbouring networks, baby monitors, microwave ovens and Bluetooth devices share the 2.4 GHz band.
- The device. A phone has a small antenna and transmits at low power, so it may hear the router while the router cannot hear it.
- Router power and antennas. Built-in or small antennas spread the signal widely but weakly. Local rules also limit transmit power.
2.4 GHz versus 5 GHz outside
- 2.4 GHz usually travels farther and gets through walls and foliage better. It is slower in many setups and more crowded.
- 5 GHz is usually faster at short range but fades faster with distance and obstacles.
For the back garden, try 2.4 GHz for reach and 5 GHz when you are near a window or in direct line of sight. If your router uses one network name for both bands, a device may pick the wrong one. Splitting the names lets you choose.
How to measure your own reach
- Use a free Wi-Fi analyzer app on a phone, or the Wi-Fi settings screen.
- Walk outward from the house along the direction you care about, noting where the signal drops.
- Run a speed test at several distances, not just a signal bar reading.
- Repeat on both bands.
Write down where the signal becomes unusable. That tells you whether a small adjustment or new hardware is needed.
Free fixes first
- Move the router closer to a window or wall that faces the yard, and keep it off the floor and away from metal objects.
- Change the Wi-Fi channel if neighbours crowd yours. Many routers can do this automatically.
- Adjust the antenna angles. Vertical rod antennas radiate best sideways, so a slight tilt can help reach another floor.
- Update the router’s firmware.
- A curved reflector behind a router antenna can push more signal one way. See does aluminum foil really boost Wi-Fi for how well that works.
Hardware that actually extends reach
- Outdoor access point: a weatherproof unit, usually powered by PoE, wired to your router with Ethernet. This tends to be the most reliable way to cover a yard.
- Mesh node with outdoor capability: helpful if you already use mesh. Placement matters, since nodes need a good signal from the previous node.
- Wi-Fi extender: can work when it is placed where it still receives a strong signal. Each wireless hop can cut throughput, and chaining several extenders is generally a poor idea.
- Replacement antennas: a higher-gain omni antenna can help some routers that have detachable ones. Check the connector type first with our guide to SMA versus RP-SMA connectors. More gain does not fix weak transmission from the device end, as explained in Wi-Fi antenna gain versus range.
For a larger property, see WiFi signal extenders for 10,000 square feet.
When it is a link, not coverage
If the place you need is a separate building such as a garage, workshop or barn, think of it as a link between two points rather than extending coverage. See how to get Wi-Fi to a detached garage or shed and point-to-point Wi-Fi bridges. For long-distance choices, see our guide to long-range Wi-Fi antennas.