Installation and Wiring

How to eliminate Wi-Fi interference?

You can usually reduce Wi-Fi interference, not remove it. Move the router, pick a clear channel, use 5 GHz, and keep 2.4 GHz devices away to improve your signal.

On this page
  1. The short answer
  2. Common causes
  3. Step-by-step fixes
  4. Check and test as you go
  5. When the problem is a TV antenna

The short answer

You can usually reduce Wi-Fi interference a lot, but it is hard to remove completely, especially in apartments or dense neighborhoods. The main fixes are moving the router, choosing a less crowded channel, using the 5 GHz band where you can, and keeping other 2.4 GHz devices away from the router.

Common causes

  • Other Wi-Fi networks using the same or overlapping channels. This is the most common cause in crowded areas.
  • Household electronics that use the 2.4 GHz band, such as microwave ovens, cordless phones, Bluetooth devices, baby monitors and some wireless cameras.
  • Physical obstructions: walls, floors, metal, mirrors and water (such as a fish tank) weaken the signal, which makes interference more noticeable.
  • Distance between the device and router. A weak signal is more vulnerable to noise.
  • Outdated or poorly placed equipment, such as a router tucked in a cabinet.

Step-by-step fixes

  1. Reposition the router. Place it in a central, open and elevated spot, away from thick walls, metal objects and appliances.
  2. Keep 2.4 GHz gadgets away. Move cordless phone bases, baby monitors and similar devices a few feet from the router, and avoid using the microwave while testing.
  3. Restart the router and update its firmware, which sometimes helps with channel selection and stability.
  4. Switch bands. If the router is dual-band, connect devices to the 5 GHz network where possible. It is generally less crowded, though it does not travel as far through walls, and older devices may not support it.
  5. Change the channel. On the 2.4 GHz band, channels 1, 6 and 11 are the non-overlapping ones in North America, and many routers default to 6. Use a Wi-Fi analyzer app or tool (inSSIDer is one example, and there are phone apps) to see which channels nearby networks use, then pick the quietest. Some routers can do this automatically.
  6. Use wired connections (Ethernet) for stationary devices such as a TV, console or desktop. This removes them from the Wi-Fi equation.
  7. Add a mesh system or access point if the problem is a weak signal in a distant room.
  8. Consider a newer router if yours is old. Newer standards handle crowded environments better.

Check and test as you go

After each change, test the speed or stability from the problem spot, so you know what helped. Make one change at a time.

When the problem is a TV antenna

People sometimes blame Wi-Fi when their TV antenna picture breaks up. TV broadcasts are on very different frequencies, so the fix usually lies elsewhere. If that is your situation, see TV antenna interference from Wi-Fi and how to fix it.

The complete guide to installation and wiring

How to Install an Outdoor TV Antenna
Read the guide

Keep exploring

Guides from other topics

All topics →