Installation and Wiring

How to connect onn TV to cable?

Connect an onn TV to cable with a cable box over HDMI, or with coax into the TV's cable/antenna jack. Select the input, scan channels and fix common problems.

On this page
  1. The short answer
  2. Option 1: Cable box with HDMI
  3. Option 2: Coax straight to the TV
  4. If channels are missing or the screen is blank
  5. Different kinds of onn TV
  6. Using an antenna and cable together

The short answer

You can connect an onn TV to cable in two main ways:

  1. Through a cable box, with an HDMI cable from the box to the TV. This is the usual method and works for most providers.
  2. Straight into the TV with coax from the wall jack to the TV’s cable/antenna input, which gets you only the channels your provider sends unscrambled.

Menu names differ between onn models, so treat the steps below as a general guide and check your TV’s manual for exact wording.

Option 1: Cable box with HDMI

  1. Turn off the TV and the cable box.
  2. Connect the coax from the wall jack to the “Cable In” or “RF In” jack on the cable box, following your provider’s instructions.
  3. Connect an HDMI cable from the box’s HDMI Out port to an HDMI input on the onn TV.
  4. Plug in and turn on both devices.
  5. Press Input or Source on the TV remote and select the HDMI port you used.
  6. Follow the provider’s on-screen activation steps, if any.

With this method, you change channels with the cable remote, and the TV acts as a display. No channel scan on the TV is required.

Option 2: Coax straight to the TV

This works if your cable provider delivers some channels without a box. Many providers have moved to encrypted signals, so a box or adapter may be required for most channels.

  1. Screw the coax from the wall jack into the Cable/Antenna In (or similar) jack on the back of the TV. Hand-tighten the connector.
  2. Turn on the TV.
  3. Select the TV or Live TV input.
  4. Open the settings for Live TV or the antenna/cable tuner and choose Cable as the source, if the TV asks.
  5. Run the channel scan and wait for it to finish.

If your provider requires a box, a scan may find few or no channels, so ask them what is included.

If channels are missing or the screen is blank

  • Confirm the correct input is selected.
  • Check that the coax is tight at both ends and that the wall jack is live.
  • Re-run the scan after changing the source from antenna to cable or the reverse.
  • Check that the cable box is powered on and showing a picture.
  • Try a different HDMI port or cable.
  • Call your provider if the box needs activation or the line is not live.

Different kinds of onn TV

onn sells TVs that run different software, for example Roku TV or Google TV, as well as streaming devices. The cable and antenna connections are much the same, but menu names differ. Streaming boxes and sticks do not have a coax tuner and generally cannot receive cable directly. They need a cable box or an app instead.

Using an antenna and cable together

Most TVs have one coax input, so you can only use one source there at a time. Some options are an A/B switch, putting the cable box on HDMI and the antenna on the coax input, or switching the TV’s source between them. See how to install a TV antenna amplifier for more on combining an antenna with cable, and how to split a TV antenna signal to multiple TVs if you need to feed more than one TV.

The complete guide to installation and wiring

How to Install an Outdoor TV Antenna
Read the guide

Keep exploring

Guides from other topics

All topics →