Two different jobs
“RV and car TV antennas” usually covers two quite different things:
- TV reception for an RV, caravan or camper, where a roof-mounted antenna feeds the on-board TV.
- Antennas on cars and trucks, which are mostly AM/FM radio masts. Some vehicles also have TV tuners, but that is less common now that most people stream or use phones.
This guide covers both briefly, because many of the same ideas apply: height, clear sky, a solid mount and good cable connections.
Types of RV TV antennas
- Crank-up omnidirectional antennas (the familiar Winegard-style “batwing” or similar). They are raised with a hand crank from inside the vehicle and rotated by hand. They receive from all directions, so you do not need to aim them at a tower, though they work best for moderate distances.
- Directional or rotating antennas that you point toward the station, giving more reach where towers are in one direction.
- Fixed omnidirectional domes or “shark fin” style antennas, with low profile and no moving parts.
- Portable or temporary antennas that you place on a mast or tripod outside the vehicle for stronger reception.
Many RV antennas have a built-in booster, usually powered from the RV’s 12V system through a wall plate or switch. If the booster is not powered, reception is often poor; check the wall plate switch first. For more on amplifiers, see how to install a TV antenna amplifier.
Choosing an RV antenna
- Decide between omni convenience and directional reach.
- Check whether it fits your roof, clearance and travel height.
- Consider whether you want a booster and power switch.
- Look at whether it suits UHF and VHF, since both bands are in use.
- Check that your TV or RV has a digital tuner (almost all current sets do).
Because antenna brands and models change, check current manuals and reviews instead of relying on a single list.
Installing a roof-mounted RV antenna
Every RV and roof is different, so follow the manual for your antenna and your RV manufacturer’s guidelines. In general terms:
- Plan the location, with clearance from vents, air conditioners and other roof items, and from low branches or overhead wires.
- Check what’s underneath. Roof framing and wiring locations matter for screws, and the cable has to reach the wall plate.
- Prepare the mounting surface by cleaning it.
- Attach the base with the supplied fasteners, using a sealant that is approved for your roof material (such as a self-leveling lap sealant for rubber or fiberglass roofs). Ask your RV dealer or manufacturer if unsure.
- Run the cable through the roof entry point and to the wall plate or booster, and seal the entry.
- Connect to the TV, and run a channel scan.
- Inspect the sealant periodically, since leaks from roof fittings are a classic RV problem.
If you remove an old antenna, expect to deal with the holes it leaves. One owner on a Chinook forum described filling the small screw holes with epoxy and temporarily patching the larger holes with flashing and butyl tape, so use the antenna’s own instructions in reverse and a sealant suited to your roof.
Working on a roof is risky, especially near overhead lines. If you are uneasy, have a dealer or mobile RV technician do it.
Using a Winegard-style crank-up
- Raise the antenna with the crank until it is fully up, but lower it before driving.
- Turn on the booster, if present, using the wall plate switch.
- Scan for channels in your TV menu.
- Rotate and rescan. Even “omni” crank-up designs can work better in some positions. If your model is directional, rotate in small steps and rescan each time.
- Rescan at each new campsite, since the stations change when you move.
Taller is usually better for reception, and trees or buildings can block signal. If the campsite is poor, parking in a different spot can matter more than any antenna change.
Cost, DIY and professional installation
Many people install their own antenna, particularly a simple replacement. Whether you should depends on your comfort with roof work and sealing. Prices for professional installation vary widely by location, antenna type and the amount of cable and roof work required. Get quotes from local installers or RV service centers.
How high should a TV antenna be?
For a house, higher is generally better, as long as the antenna is clear of obstructions and the mount is secure. There is no universal figure, and the right height depends on the terrain and distance to the towers. For an RV, the roof height is usually what you have, and a crank-up gives a modest additional boost.
Car antennas
Testing your radio antenna
- Compare reception with another car or a portable radio at the same location.
- Check that the mast is screwed in tightly and the base and cable connections are clean.
- If AM/FM stations are weak or noisy everywhere, a damaged mast, a faulty base or a loose cable is a common cause.
- If the antenna is power-operated, check whether it extends and retracts properly.
Are longer car antennas better?
Not necessarily. FM antennas work best when they are around a quarter wavelength, and a modern short mast is designed for acceptable reception. Longer is not always better and may not make any measurable difference. Shorter masts are often used for style and car-wash safety, and a manufacturer of one short replacement mast notes reception may weaken in remote areas.
Replacing a mast
Replacement masts often screw into the existing base. Choose the correct thread type and fit for your vehicle, remove the old one, and install the new one, tightening it fully. Poor reception after a swap is often a matter of a loose mast.
For general FM choices at home, see what type of antenna is best for FM radio.
Best indoor TV antenna
Rankings from magazines and review sites change as products are updated, and they depend on location. For the best results, check current reviews and test in your own location. Reception depends heavily on distance to towers, window placement and aiming, so see how to aim and align a long-range TV antenna.