Ham Radio Antennas

What are the benefits of using a folded dipole antenna?

The benefits of a folded dipole: wider bandwidth, a higher feed impedance that suits twin-lead and Yagi driven elements, a rugged build and broadband HF variants.

On this page
  1. Wider bandwidth
  2. A higher impedance that is useful
  3. Useful as a Yagi driven element
  4. A rugged, DC-grounded structure
  5. Broadband HF versions
  6. Keep the trade-offs in view

The main benefits of a folded dipole are a wider usable bandwidth, a higher feed impedance that suits twin-lead and some matching schemes, a sturdy structure and the ability to make broadband antennas for HF. It does not have more gain than a plain dipole, so its advantages are about matching and bandwidth, not extra signal.

Wider bandwidth

The SWR of a folded dipole stays low over a broader range of frequencies than a single-wire dipole of the same length. For a band where you operate across a wide span, that means less retuning and fewer compromises. This is the property that broadband designs build on.

A higher impedance that is useful

Its feed impedance is around four times that of a simple dipole, near 300 ohms. That suits:

  • 300 ohm twin-lead, which is how many FM and TV antennas are fed;
  • 4:1 or 6:1 baluns to step down to 75 ohm or 50 ohm coax;
  • Yagi antennas, where the other elements lower the impedance of the driven element, and a folded dipole starts high enough to end up near a useful value.

Useful as a Yagi driven element

In a Yagi, nearby parasitic elements pull the driven element’s impedance down. Starting with a folded dipole means the final impedance is close to something easy to match, which is why folded driven elements are common on VHF and UHF beams.

A rugged, DC-grounded structure

Because it is a continuous loop, the antenna conducts DC from one end to the other, which can help drain static build-up when properly grounded through a suitable arrangement. Some designs are also mechanically sturdy. This is a modest benefit, not a reason to choose one alone.

Broadband HF versions

Folded dipoles with terminating resistors, such as the T2FD and commercial models like the Yaesu YA-30, cover a large range of frequencies with little or no tuner. The cost is some loss in the resistor. See HF delta loops and broadband folded dipoles.

Keep the trade-offs in view

Folded dipoles are bulkier and need matching. See the disadvantages of folded dipole antennas and how they differ from a regular dipole before deciding.

The complete guide to ham radio antennas

HF Antennas for Ham Radio: Choosing the Right Type
Read the guide

Keep exploring

Guides from other topics

All topics →